Extra-Wide Plank LVP and Slab Prep in Groveland and Montverde
A few years ago, a 7-inch luxury vinyl plank felt like an upgrade. In Central Florida showrooms this fall, 7 to 9 inches is simply the expected size, and 10-inch-and-wider planks in extra-long lengths are showing up more and more for big open floor plans. Wide planks look great: fewer seams, more of the wood visual on each board, and a calm, continuous floor from the front door to the lanai. But the wider and longer the plank, the less forgiving it is of what is underneath. If you are planning extra-wide LVP in Groveland, Montverde, or nearby, slab prep is the part of the project that decides how it turns out.
Why wide planks are pickier about the slab
Most Central Florida homes sit on concrete slabs, and slabs are rarely perfectly flat. Shrinkage cracks, trowel ridges, low spots near old tile, and high spots at slab joints are all common. A narrow, short plank can bridge small dips. A long, wide rigid plank spans more of the floor, so a low spot under the middle of the board can leave it flexing when you step on it, and a high spot can make the board rock. Over time, that movement is what leads to clicking sounds, separating joints, and locking systems that wear out early.
Every manufacturer publishes its own flatness tolerance, usually stated as a maximum dip or hump over a set distance. Wide and long formats tend to sit at the stricter end. Following those numbers matters both for how the floor feels and for keeping the warranty valid.
What good slab prep looks like
- Clean removal. Old tile, thinset, carpet tack strip, and adhesive ridges come up completely so nothing telegraphs through.
- Checking flatness. The slab gets checked with a long straightedge or level across the room, marking highs and lows instead of eyeballing it.
- Grinding high spots. Ridges and humps are ground down rather than covered.
- Filling low spots. Dips are filled with a patch or self-leveling compound suited for flooring, then allowed to cure before planks go down.
- Moisture check and barrier. Florida slabs can carry moisture, so readings are taken and the right moisture barrier or underlayment is used for the product.
Layout matters more with long planks
Extra-long planks look best when they run the long direction of the main living space or follow the main sight line from the entry. In open plans, the installer should plan where transitions fall, how planks meet at hallways, and how end joints are staggered so you do not get a repeating stair-step pattern. Wide planks also need proper expansion space at walls, door frames, and cabinet runs, especially near big sliding doors where sun heats the floor.
Floating, GripStrip, or glue-down?
Most rigid-core wide planks are installed floating with a click-lock system, which is fast and works well over a properly prepared slab. In some situations, such as very large continuous rooms or spaces with heavy direct sun, a glue-down product or method can be a better fit. Ask which system the manufacturer requires for the plank size you picked and the size of your rooms, since some products limit how far they can run without a break.
Choosing the plank itself
The looks Central Florida homeowners are asking for right now are warm and natural: sun-bleached and honey oaks, light caramel, and soft greige that reads like stone instead of cold gray, usually with a matte, textured surface. With extra-wide planks, also check how often the print repeats. In big sunny rooms, repeats are easier to spot on a cheaper product, so look at several boards together, not just one sample.
Questions to ask before install day
- What flatness tolerance does this plank require, and how will you check my slab against it?
- Is grinding or leveling compound included in the quote, or priced separately if needed?
- How will you test for slab moisture, and what barrier or underlayment will you use?
- Which direction should the planks run, and where will transitions go?
Plan your wide-plank LVP floor
The Flooring Guys are a family-owned crew with over 20 years of experience, installing LVP for homeowners in Groveland, Montverde, Clermont, and across Metro Orlando. We can bring wide-plank samples to your home, check your slab, and quote the prep your floor actually needs.
Call or text The Flooring Guys at (407) 379-1585 for a free estimate on extra-wide plank LVP installation.
Related: LVP installation · Duralast LVP colors · Get a free quote